-
15-03-2020 #1
Hi
I need to upgrade my controller on my 3 axis cnc I am looking at installing a Masso controller but I am not confident enough to do the work if there is anybody out there who can carry out the work not a company an individual please contact me. 07722530393
Joss
-
15-03-2020 #2
I can do it for you but I cannot come to you. In the past, I've converted machines for people who have sent the machine to me on a pallet then arranged collection when finished.
So if you can not find anyone this could be an option. Or get in your Vehicle and bring up to Goole in East Yorkshire.
-
15-03-2020 #3
Hi thanks for getting back bit of a problem its 2.5m long x 1m wide and weighs in at a 1/4 of a ton. Do you know anyone who would be willing to come out and do the work I am in no hurry but I have waited 2 years to do this upgrade.
Regards
Joss
-
15-03-2020 #4
-
15-03-2020 #5
thanks for getting back
-
15-03-2020 #6
If you don't find anyone and fancy having a go at doing it your self I'll gladly guide you thru doing it.
I've never fitted a Masso before but looking at it then it should be straight forward enough and even easier if you have a working machine already because won't need to trace wires etc.
I've helped many builders who have started from scratch and who had little to no electrical knowledge successfully wire up machines so if your machine works already this should be a doddle.
-
16-03-2020 #7
Thanks that's encouraging will get in contact when I have purchased all the parts. Just one thing can you recommend an upgrade setup not using Mach 3 software?
-
16-03-2020 #8
If your talking about controller that is stand alone like the Masso then no can't recommend any. If your willing to use a PC then you have several choices but a common one which is good is from CNCDrive either the UC300 or the AXBB-E depending on your needs.
http://cncdrive.com/AXBB.html
-
16-03-2020 #9
-
16-03-2020 #10
Hi I am looking for a PC based unit because that uses a USB connection its no use changing the format. Out of the 2 for perfomance, reliability and ease of installation what would you recommend? the cnc is a 3 phase unit will that not effect the controller.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Tonsen 4 Axis Controller/Bob
By Pointy in forum General ElectronicsReplies: 30Last Post: 18-07-2018, 07:02 PM -
Upgrade to x axis required. MG or HG rail
By marbles in forum Rails, Guideways & BearingsReplies: 0Last Post: 10-12-2017, 01:51 PM -
FOR SALE: leewood 3 axis controller from an isel 3 axis cnc
By nobby in forum Items For SaleReplies: 1Last Post: 24-09-2014, 09:08 AM -
advice on upgrade to 5 axis control
By alanb in forum General ElectronicsReplies: 17Last Post: 27-07-2012, 06:29 AM -
Day shift Manual Miller/Night Shift Turner and Grinder Required - Berkshire
By J Maynard in forum Opportunities Available & SoughtReplies: 0Last Post: 06-01-2012, 11:46 AM
Bookmarks