. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-11-2020 #7
    hardenum's Avatar
    Lives in Karlsruhe, Germany.
    hardenum
    Last Activity: 04-04-2021 Has been a member for 2-3 years. Has a total post count of 38.
    Again many thanks to JAZZCNC and m_c!

    A dedicated direct drive spindle is too long for my build, the shortest I found is 385mm (https://sc02.alicdn.com/kf/HTB1l9RHX...XXaC.jpg_.webp) with a motor that puts me at almost 700mm Z axis and that's just too long, so unless I design my own spindle I don't see how I can fit in max 500mm length. I guess that's off the table then.
    Last edited by hardenum; 16-11-2020 at 07:11 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Big Epoxy Granite machine, Which frame is better ?
    By EZELab in forum Gantry/Router Machines & Building
    Replies: 27
    Last Post: 18-09-2020, 11:18 PM
  2. BUILD LOG: Epoxy granite vertical mill build log
    By Nick in forum DIY Mill Build Logs
    Replies: 60
    Last Post: 08-06-2020, 06:30 AM
  3. Large Format Epoxy Granite Gantry CNC - Looking For Feedback
    By Max Maker in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 23-08-2019, 04:57 PM
  4. Epoxy granite or mineral casting
    By mike mcdermid in forum Gantry/Router Machines & Building
    Replies: 46
    Last Post: 20-02-2014, 06:21 PM
  5. Epoxy Granite Molds?
    By gavztheouch in forum Moulding Machines
    Replies: 8
    Last Post: 18-02-2014, 07:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules