Questions on modification of a system

[Lee Roberts]

I think Dice (kevin) sell's the aluminum extrusion from Hepco Slide Systems Ltd.

You should have told him your plan, he would have sent the sides you need with the first order im sure.

He has also got the extrusion listed on his website, measure your current gantry sides then match them to whats on his site ?

Drop him an email, dont think he has got the whole Hepco range on his site, watch out for the VAT to.

Cheers,

[m.marino]

I think Dice (kevin) sell's the aluminum extrusion from Hepco Slide Systems Ltd.

You should have told him your plan, he would have sent the sides you need with the first order im sure.

He has also got the extrusion listed on his website, measure your current gantry sides then match them to whats on his site ?

Drop him an email, dont think he has got the whole Hepco range on his site, watch out for the VAT to.

Cheers,

Thanks have looked at both sites and the Hepco does not list the extrusion that I have on the side panels which form the gantry. So will e-mail him and see if he carries it and how best to go about changing out the sides so that i can get the depth that need in Z (cutting depth of 11 -20mm with another 6 - 8mm of area below not being worked on in that cut).

Thanks Lee,

Michael