bosch gkf 600 router collets and bits

[gedereco]

Hi,
Just finished building my cnc machine and have fitted a bosch gkf 600 router which is 1/4" . Does anybody know where I can get a 1/8" collet to fit and also best place to buy bits. I will predominately using it to cut wood and msg.

[EddyCurrent]

This is the best I could find, collet sleeves, there's a 3.2 to 6.35mm one that should do your job

http://www.trend-uk.com/en/UK/trend/...=collet+sleeve

[gedereco]

This is the best I could find, collet sleeves, there's a 3.2 to 6.35mm one that should do your job

http://www.trend-uk.com/en/UK/trend/...=collet+sleeve

I've just orderered one. I'll give it a go. Just waiting to get my computer back from repair shop and ill try them out. Thanks for link.

[longy]

http://www.ebay.co.uk/itm/330966499288 there you go 1/4" to 1/8" or 6.35mm to 3.175mm in new money LOL
Mike

[gedereco]

Nice one thanks. Longy.

[longy]

gedereco your welcome mate, I had them in my watch list but have got some 1/8 collets now and never removed the watch just in case.
Mike

[gedereco]

I was looking at the 1/8" cnc bits from China for cutting wood/mdf, anyone tried these. 5 for a £10 I guess worth a try.

[EddyCurrent]

There's these too 10 for a tenner, and same seller has others

http://www.amazon.co.uk/Flutes-Carbi...=ball+end+mill

[gedereco]

Thanks for that eddy. I'll try them.