Thread: My Build
Hybrid View
-
10-09-2009 #1
Just off Junc 28 of the M1, you are welcome anytime.
Andy
Oh and thanks for the comments
-
11-09-2009 #2
Here's the first video, all its doing here is engraving MDF with a Router V bit.
The spindle is running at 12000 RPM not sure what the feedrate was I was to busy watching what the spindle was doing.
Last edited by Lee Roberts; 19-09-2010 at 11:52 PM.
-
The Following User Says Thank You to audioandy For This Useful Post:
-
11-09-2009 #3
This video is much the same only this time cutting some plastic laminate material.
Last edited by Lee Roberts; 19-09-2010 at 11:54 PM.
-
11-09-2009 #4
Hey Andy.
that first video, if you play it backwards and speed it up it's playing the Beatles "Let it be " :rofl:John S -
-
11-09-2009 #5
Nice lol
Some people have too much time on their hands :lmao:
-
11-09-2009 #6
Hi Steve
Yes it is the steppers you can hear, they were turning very slowly and I hav'nt finished setting them up yet so might be that, or might be just the noise they make.
I have had it running a bit faster this afternoon and sounded ok so not sure whats going on in the vid?
Andy
-
21-09-2009 #7
John
I have now tuned my steppers and they sound alot different now ; )
Last edited by Lee Roberts; 19-09-2010 at 11:56 PM.
-
21-09-2009 #8
LMAO..... Quality!
-
21-09-2009 #9
Any suggestions on a sound track for this ?
http://www.stevenson-engineers.co.uk/files/DSCF0438.AVI
.John S -
-
21-09-2009 #10
What about this.......
(Please note - those who are easily offended then don't f&cking click on the link above)Last edited by Lee Roberts; 19-09-2010 at 11:57 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: New Build - For Your Amusement - MK-2 build
By Karl in forum DIY Router Build LogsReplies: 12Last Post: 08-02-2017, 08:03 PM
Bookmarks