Quote Originally Posted by Tom View Post
...The datasheet shows that if the inhibit line is left at 0V the PSU will sit at 42.8V (out of regulation). You also mention that it might turn off at some point, but I can't see that mentioned in the data - is this from experience?
No I haven't tried it - but whats the point of an 'Inhibit' that doesn't? Need to put a 100mA load on as well for test so need to find a 470ohm 10W resistor...
Quote Originally Posted by Tom View Post
...
Need to get some 4.8mm spade connectors first though - I only have 6.3mm and they're not secure on the terminals...
Maplin's do them N35CY (Blue) and they do red as well...