Activity Stream

Are you viewing it on a phone or tablet? If you use a PC I think the options are obvious.

I can help you with this. I don't specifically machine sprockets, but motorcycle engineering was a big part of my business in the 90s and early 2000s...

Many Thanks m_c, . Please slow down a bit, I really appreciate all your help, but you are forgetting I said I was above a beginner in electrics,...

Hi EddyCurrent, I would like to upload some drawings probably in PDF format, but i have learnt how to do that yet on this forum. Cannot seem to...

I generally use RS part 488-2610 (24VDC coil, but other coil voltages are available), along with the holder 803-376 You'll likely get equivalents...

Ray, Forget the electrics for now, I would like to see some mechanical drawings of your proposed build.

Thanks m-c. I get it a bit better now, can i be a pain and ask what type of relay you would recommend, i have only used the small type powered and...

I've not got time to draw a diagram, but break it down into key sections. Start with the mains. Mains power in -> isolator switch. Then it...

I've not got any wiring diagrams to hand, but here's a quick one I've thrown together. I generally use DIN rail mounted 'ice cube' relays...

Thanks m_c, I am in unfamiliar territory here, can I be cheeky enough, do you have a schematic I could look over involving the 2 relays you...

According to the 'last activity' date Seabass has not posted here for a few years. If you haven't done so add a comment on one of the above YouTube...

This has been debated a few times on here, but there's not really a 'correct' way to do it. Key thing is you want everything to stop in a...

My preference is for dedicated machines, but whatever works for you.

hi, somebody know how can get the cad for this build thanks

Personally I would go with a dedicated pc

Hi, can you send me a link to the item? Ray

There's a couple on eBay for around £20 also there are others such as Telemecanique Preventa. My background is electrical by the way, I think you...

Just had a look at those PILZ relays, a bit steep for me. Ray

Thanks Eddy Current. My initial thought was to place one E Stop in the circuit, then power all 3, 36v outlets on my PSU through the E Stop,...

If it's any help, here is a link to my schematics, https://www.mycncuk.com/threads/6565-Ready-Steady-Eddy?p=52213#post52213 They have changed...

Hi Ray Good luck with your project, let us know how you get on. Cheers Andrew