Activity Stream

Cheers bud

That wold be my choice of post processor too.Check the tool parameters perhaps.The other thing might be to use "Vector Validator" to see if any...

Any idea what post processer that should be used with this machine I have it on AXYZ Arcs mm *nc just now and carver a flourish , the roughing...

You are welcome.

Hi Bud The switch on the back of the head has three settings. Auto.Hand. and off , I will have a look on vcarve Pro. I will have a look on the...

I know nothing about suds,there might be a setting in Vcarve that would activate it if there isn't a tap.Are you sure it isn't an autolube system? ...

Welcome bud Hope you find this site useful and post your projects for all to see

Exactly Routerdriver Small steps, one at a time, But two things that baffles me is how do you get the suds working, the pot on top of the machine...

Good to know it worked out.Make haste slowly and be careful when working with material of a different thickness.

Bingo and just like that , it's all working perfectly. Write the program what I want in v,carve Pro and send it across. Perfect. Just took...

Thanks for the offer Andy. I don't even know what UCCNC is, lol, I'm guessing it's a controller software of some sort. That's how green I am. I...

Thanks for the reply Neale. I still have the install file on my everyday PC, so that's not a problem, I also don't have the licence key anymore. I...

PM Sent

If I was in the UK, I would grab this quickly Raj, but sadly shipping it down under would be prohibitive.

Still available, now £1,500. Can sell parts seperatly if there's more interest.

Am on it bud This is going to be one hell of a learning curve for me, just a thought is there anyway of brining it into the 20th century . Just a...

If you managed to send a file,you've cracked it!Its a year or two since I had to fight Toolpath and I wasn't using it to create programs.I suggest...

Hi bud Yes I have it and I have only managed to send one file over so far using toolpath as I have only seen the lights on the box RS485 come on...

The screenshot of your computer suggests that you already have it.Have you ever clicked on the icon to check? Quite a few years ago I heard that...

Hi all One more question. Will axyz toolpath software work on Windows 10 before I go and buy it.

Huh. Didn't realise you were so close. I'm over in Fareham and am regularly in Havant, so if you want some moral support and a second set of eyes I'm...

Thank you Routerdriver Really appreciate your help bud, I really do ,Thank you Going to have another go tomorrow evening and will keep you updated...

You could buy a cheap second-hand PC off eBay for less than £100, install your existing PCI card in it (but make sure that if it is a full-height...

Just uploaded some pictures

Lets begin with the collet;this page should give you the information https://littlemachineshop.com/info/er_collet_sizes.php To create a program...

Hi bud Thank you for your help , but do I still need to install a software program that will enable me to write a program ie the name of a sign or...