Activity Stream

No progress. Company in Ireland will look at it for £200, then there would be fox costs. We would need to post Scotland to Ireland etc . No...

Ummm. He posted this ad almost ten years ago mate..

Hi Brian, We have a DSC 2000 that is showing the same symptoms. Did you ever find a remedy to the issues you were having with yours? Thanks ...

video https://youtu.be/stbWpra7O_4 so you can hear the z stepper moving the z axis

not been in the cabinet for a while, its still messy :hopelessness:

This is positive news. I will see if I can find a manual for it online before I next have a chance to look at it. Thanks I will report back,...

Those tests would indicate that the wiring and the spindle appear to be OK. Might be worth trying a factory reset on the VFD.

That potential cost is why I swapped my spindle motor for a servo.

well nearly original ;) original stepper drivers. cant get a photo till im back in workshop tomorrow now, its a bit messy inside be warned. ...

Not that original then. What stepper drivers are fitted? A photo of the control cabinet would probably be good. My thoughts to it having only...

all original so stepper and ESS running mach3 (PC) ive owned the machine for over 10 years now and not had this issue before, had many others....

Stepper or Servo machine? Fanuc or PC control?

yes all original. its a difficult one to know where to start

Sounds like interference is getting into the Z step/dir signals.. Is it still the original spindle?

so an update with spindle off and z in the air. if i move x and y around manually z doesnt change. if i start the spindle and dont touch...

Nice t o have such kind of information, looking forward to learn about the product deeply for technical knowledge.

Is this available right now, what if you have to ship outside of your country. What will be your shipping charges apart from the price of the product.

Sorted out today with two bolts down the threaded holes :sneakiness:

Hi m_c Thanks for replying to my question, I managed to spare half an hour today to investigate a little bit. I have done a few continuity tests,...

I'll work out all the steps I took to figure it out and put it down on paper. Was quite simple in the end as these things usually are once you get...

One thing that Toolpath was invaluable for was in figuring out what was wrong with my post coming out of Fusion 360. A simple test rectangle was...

If you have the original AXYZ CD,the Toolpath program should be on it and it will allow you to send the Gcode directly to the controller in one very...

It would do future buyers of AXYZ machines a service if you posted a step by step account of the process as this question crops up from time to time.

I remain convinced that Toolpath is a very useful program for sending files to the controller and wouldn't advise exploring it's capabilities beyond...

Pete, do you have the function processes manual. I have one and could easily scan and upload for you. I also have two gigantic manuals but one is a...