Activity Stream

Nice t o have such kind of information, looking forward to learn about the product deeply for technical knowledge.

Is this available right now, what if you have to ship outside of your country. What will be your shipping charges apart from the price of the product.

Sorted out today with two bolts down the threaded holes :sneakiness:

Hi m_c Thanks for replying to my question, I managed to spare half an hour today to investigate a little bit. I have done a few continuity tests,...

I'll work out all the steps I took to figure it out and put it down on paper. Was quite simple in the end as these things usually are once you get...

One thing that Toolpath was invaluable for was in figuring out what was wrong with my post coming out of Fusion 360. A simple test rectangle was...

If you have the original AXYZ CD,the Toolpath program should be on it and it will allow you to send the Gcode directly to the controller in one very...

It would do future buyers of AXYZ machines a service if you posted a step by step account of the process as this question crops up from time to time.

I remain convinced that Toolpath is a very useful program for sending files to the controller and wouldn't advise exploring it's capabilities beyond...

Pete, do you have the function processes manual. I have one and could easily scan and upload for you. I also have two gigantic manuals but one is a...

Hi bud Glad your machine is working well, and yes they are one hell of a well built machine I am over the moon with mine But it wasn't always like...

Did you figure this out? If not, I was able to do just this tonight. It's very easy in the end. Let me know if you need some help. Ken

Did you get anywhere with this? I have what you need in an electronic file. Let me know. Ken

After I sent you that private message I was able to get most of my problems sorted. I now have the machine talking to Windows 10 through a cheap...

Try lasertree they have an upgrade I think

Having a couple of issues is all. Firstly, my machine doesn't do the warm up routine when I first start it up and I'm wondering if this is a...

The machine is working good just now and getting use to it , I am cutting aluminium. Stone.wood and I am happy with the results, am happy with it ....

photos attached Thank You.

It's actually called DNC but yes, this is all you need to get code across.

I have the same machine and would like to talk about how you're making out with yours. I'm having some spindle speed issues with mine.

Brooce, Hopefully you now have access to versions 1.932 and 1.935. Please let me know if this is OK or if I need to do more. Regards.

I use this company www.wmh-trans.co.uk I have had good ball screws and rails from them. Phill

No personal experience of buying ballscrews from anyone still in business, I'm afraid. BST Automation via Aliexpress is often recommended in this...

Are there any new updates? Is it possible to upgrade to a laser cutter?

Cheers, I've just looked through the thread and noticed there's no good images of the back of the machine. There are two steppers on the x-axis, they...

I had a quick look back through the thread after I wrote my last post (thread started a long time ago!) and it seems that you are driving both gantry...