- Design a Steel Machine - Stress-Analysis - Load?
- Fully supported linear bearings - Radial squareness
- Help with plasma controller build
- First cnc build drive advice needed
- Purchasing new parts for new build.
- eBay Nema23 Stepper mounts
- Setting up and tuning dual-motor X axis
- What MOD rack size to use?
- Shipping of long profile rails
- Kompass H 1000 GS
- Needs helps to see if will work this machine.
- Recommendations for Z Axis?
- Cheap (<200$) DIY wood router
- Kompas 2000 machines...any feedback
- New build a stronger machine for my workspace.
- Initial design advise wanted
- building with steel tubing pre-welded plates with holes doable?
- DIY 6040 CNC - advice required!
- gantry weight
- Changing to Hiwin design from round supported parts advice grateful.
- is there too much going on with the z axis?
- Fixed Gantry small precision begineer project advice
- Project "Deep Thought"
- Give me your opinion about hobby CNC router!
- machine bedding options in Australia
- Axis scaling errors - is this just to be expected with C7 screws?
- Physicist trying to do engineering. Not going well. After advice with 4 axis gantry.
- Help with Problem X axis Stepper Please
- Igus Drylin-T
- My First CnC - Power Inverter Location
- Seek advice on which small quality router to buy/build ...
- Kress 1050 FME-1 Parts
- Mach3 Setting up home and limit switches
- Control box
- Chinese spindle teaming!!! (Or lack there of)
- 3 axis lathe/mill hybrid design.
- Opinions Please - You No There's No Short Supply On Here
- Starting to think about a new machine
- Dual drive Gantry, how fast are your speeds?
- Piranha CNC
- Fixed Gantry Design - Input Appreciated.
- Vacuum Bed
- Design for 4' * 3' gantry cnc - help me decide
- Big-ish router concept review
- Greetings and CNC build soon to start, advice needed.
- L gantry design with 2 aluminium beams bolted with T nuts inside...
- What thickness steel for mounting plate for bearings to gantry
- epoxy question
- Mach3 Auto Tool Zero help
- Assortment of questions on design
- Running CNC Router at 25mtr/minute
- Building My First CNC Router, Looking for Advice & Other Info
- BFT 20mm rail
- Mini lathe as a 4th Axis
- Confused about stepper sizing
- 1st CNC Router: Overwhelmed - Some advice please?
- Advice and opinions 3 axis gantry for cutting Ply / Hardwoods
- Moving bed - bearing spacing?
- Homemade CNC with Scrap + Chinese parts || Objective: Milling Aluminium ||
- My CNC 300*440 for processing aluminum alloys and hardwoods.
- Centroid Acorn CNC Controller
- Is there a 'standard' base design, or does everyone start from scratch?
- Help Please for Moving Gantry
- Couple of questions about carriage positioning on X axis and z axis rails
- Ballscrew cleaning methods.
- Design Study: Rail Inline With Ball Screw
- Bearing rail leveling
- Steppy CNC (my own desktop CNC design, looking for advice and opinions)
- Need advice on gantry design
- CNC 520*1020*220 for hardwoods.
- Design of small router (700x900) for aluminium
- Zaxis Ball screw question
- parts just for wood and plastic
- trying to keep the machine close to the cutting area
- welding steel base or just getting aluminium extrusion
- Aluminium Extrusion Router Build
- Router table wheels
- anyone willing to make a hole guide specially for rails?
- Bench-top or welded frame
- Alloy 5083 Tooling plate Suitable for gantry build?
- Small CNC for guitar inlay work - general thoughts
- Moving gantry and table on the same axis - why not?
- Help planning a small(?) router for aluminium please
- Is this an okay way to mount gantry to linear bearings?
- Dust shoe self making + 3D model
- Anyone tried Z-Axis from Fred at BST?
- Which Machine
- Probably a Stupid Question.
- Sanity check - thread size for linear rails
- mach3 Referencing Issues
- Anybody recognize these extrusions and connectors?
- Missing codes in auto tool changer
- servo motor and its driver are acting strange
- What a (rusty) screw up!
- How to find the right pin and Port for my PWM / and or Analog voltage output?
- Replaced faulty driver, now that axis runs in reverse
- Rebuilding gantry
- Hiwin vs BLH - Automation Overstock - Anyone have hands on these?
- What material for a frame?
- Added steel channel to X-axis c-beam
- Which stepper driver is a good alternative to Gecho 540
- Buying advice page thoughts
- europe linear rails / ballscrew kit
- CNC Router Build I am a new member, Gordon a retired farmer 70 yrs young.
- Z axis reduction question
- Steel framework damping suggestions?
- Newbie Machine Build Log (Fancy Machine)
- Gantry extrusion shape
- Rigidity of aluminium profiles and rectangular tube sections....
- Tips for beginner with small gantry engraver
- Unusal Z-axis arrangement?
- Checking out a machine. Any tips?
- Looking for 4th axis build advice
- Chinese ATC spindles
- Stepper motor needs replacing
- What would YOU do with all this?
- is surface grinding worth it ?!
- Sunfar E550 VFD....anyone have any experience please?
- Epoxy levelling, what's that magical spray ?!?
- How to find the error of my CNC
- The dude butchered my aluminum extrusion :( !!!
- Ballsrew or rack and pinion ?
- Newbie, CNC Router machine choice...please help.
- Use Epoxy for a reference straight line
- Limit switches, inertia and controllers
- Steel or Aluminum,that is my Question
- CNC suggestions for engraving aluminium plates for hot foil printing (fine details)
- Help with setting up proximity sensors and Mach 3
- School me on the best machine for big hardwood
- Starting to design out my build, looking for critique
- Spoilboard surfacing - strange problem/result
- Gantry advice please
- Help building toroidal supply
- Linear rails
- Steel x axis idea
- (TUTORIAL) Butt-joining profile linear rail with limited tools
- Re pulleys and belts
- First cnc build from surplus liquid dispensing machine
- Choosing aluminium profiles
- DIY Laser levelling using webcam and laser level
- Large Format Epoxy Granite Gantry CNC - Looking For Feedback
- Advice for rigidity upgrade. To profile or not?
- HY Chinese vfd
- Powersupply for JMC servos
- Using granite blocks for a supporting base for a cnc router ?
- To do or not to do, can it be done? MK4 drill steel.
- Aluminum plate for gantry side?
- Looking for feedback on plan for CNC router out of welded steel tubing
- New CNC build gantry questions
- Suitable cable chain
- Proximity switches or limit switches
- Question about duel X Axis drives
- New router build advice...
- Am I being silly?
- Upgrade to 3040T Machine Table/Bed, options?
- First CNC MPCNC Lowrider V2 - Help needed with cut parts
- Ecocast equivalent outside UK
- Your thoughts on a couple of Design Ideas
- Thoughts on Sorotec alu-line machine
- Aluminium Profile Type Router - Initial questions
- Electronics for Hobby-Line 6045 from Sorotec
- L Style Gantry on a 6040 sized machine?
- Help, Cutting problems
- Straight edge and machinists square
- Choosing between alternative X axis bearings designs
- Ross CNC machine
- Lowcost capable CNC - Make vs Buy?
- CNC Router - Make vs Buy
- 8X4 router build advice if possible for a total novice please?
- Closed loop stepper motor encoder help
- How to align ball screw to linear rail?
- Gantry design and FEA analysis
- Rough cost for a CNC router
- Deciding on the finer points of a budget Router table, possibly a WorkBee
- Tramming With Taut Wires
- Fixed Gantry machine design tips
- Rebuilding gantry type Suregrave engraver - advice needed!
- Xzero Raptor CNC build - linear rail and ballscrew selection
- Gantry to bed height.
- Cheap square linear rail.
- Strange phenomenon after upgrade from chinese usb control card to uc400eth
- I want to change from R&P to ball screw on my gantry
- Advice please on 100cmx60cm CNC router
- What are peoples thoughts on these on eBay - not cheap chinese
- Proximity sensor false triggers AFTER grounding it's shielding.
- Big Epoxy Granite machine, Which frame is better ?
- Epoxy-granite gantry cnc - Ballscrews with direct or belt drive? (Noise/precision)
- Help with 2 problems re my CNC6040z please
- OpenBuilds C-Beam machine
- moving gantery CNC sturdiness
- calibration for the design and initial leveling
- sent by mistake please delete
- Which solution is best for a small CNC router
- Axis not working properly
- Strong vibrations in ball screw linear actuator - is it normal
- Controller box questions MACH4 ESS/MB3 Servos CPM-SDSK-3421S and first cut video
- What size profile rails for Y axis?
- DIY CNC Router. Looking for some advise
- New machine build
- Advice on 4th Axis
- Z Axis Design Help
- Has anyone got any experience of SheetCNC or UK-DIY CNC?
- 1605 or 1610 for Inlays wood
- moving gantry base cnc with?????
- HELP - router makes incorrectly shaped radiuss
- How to home the slave sensor?
- Desktop gantry router for hobbyist
- Wood Works Ebay cnc router review
- Cable routing in V slot
- Build a fixed gantry router made of steel
- Where to buy cnc kits
- Help a fella build a cnc router😁
- Advice on ballscrew mounts for epoxy granite rebuild
- Need advice on how to transport CNC Router to new house
- Rough estimate of the force applyed by spindle on the gantry
- NEMA23 pully and pinion
- CNC Router Servicing
- Using plates made out of plywood temporarily?
- 3000x1500mm table drawing stage
- A2-8002 VFD set up - any help appreciated
- motor and gear ratio question
- linear bearing spacing
- Distance from collet to table
- y axis motor mounting suggestions
- its a start (8x4)
- fixed end supports
- axis overhang - could it increase the chance for vibrations?
- proximity switches
- Pokeys57cnc feedrate and PWM issues (MACH3)
- Machine strength from DIY to chinese
- Gcode and toolpath app
- Anyone created a DIY version of this
- sorotec router
- Stepper motor drivers or Ardunio stepper motor drivers
- DIY Gantry CNC Router - Y Axis - Moving Gantry vs Moving Work Bed
- L shape gantry
- Adding a Laser to my steel and concrete machine
- machine identification
- Moving gantry Z axis
- Ooznest Workbee Z1+, is this a good machine?
- What CNC Machine is this?
- Unwanted overcutting advice please
- New 4x8 or 5x10 cnc router build
- GRBL Loosing Zero Point between Passes
- CNC Router Survey
- What makes a good CNC router?
- Controller change on brand new 8x4 machine?
- How to mount Epoxy Granite Machine to table?
- Need help wiring in a HY VFD to my machine...!
- Failed servo/ encoder help