Maccydu
14-08-2016, 11:12 AM
19024190251902619027190281902919030190311903219033 19034Unfinished project!
Selling my machine as unfortunately a change of circumstances means I no longer have time to finish it.
Looking for £2000 - Has cost me over £3000 in parts alone.
Includes:
80x80mm profile alu frame.
Solid 20mm Aluminium bedplate and Gantry uprights.
2.2kW 18000RPM Hertz Spindle (Cost £450 including import taxes etc from Turkey)
Inverter panel
Main control panel
48V PSU
3 x DM542A Microstep Drivers
3 x Nema23 3.0A 23HS9430B Motors 3NM / 425oz
THK HSR30 Profile Rail Bearings on X & Y axis (These are worth over £500)
Profile Round Rail on Z-Axis (I'm also including some Linear Rails and Bearings should you wish to swap - these alone are worth over £150)
1605 Ballscrews on each Axis
HP Laptop with parallel printer port also included (note: battery dead - needs to be plugged in to run)
Mach3 software installed.
Also a box of bits and bobs including limit switches, junction boxes, aluminium plates, 2 boxes of caphead screws, din rail terminals etc etc.
Please note - this machine is VERY heavy and large (I'll fill in specific details later) so you'll need a van and a couple of people to lift.
This machine will cut aluminium (I've used it already to cut some of the parts I then added to it) - I have a couple of videos that I can probably upload to youtube if needed.
It is a very sturdy, well built machine, that's probably 95% complete. Might be a weeks worth of work to finish it completely.
It looks a bit grotty in the photos as I had to disassemble it when we moved house recently and I stuck loads of brown tape around the frame to keep all the bits together - Over the next couple of weeks I'll be cleaning it all up.
Can demonstrate it running.
Collect from Sandiacre, Notts, NG10 - 2 mins from J25 of the M1
Any questions, please feel free to ask.
Photos and updates to follow
Selling my machine as unfortunately a change of circumstances means I no longer have time to finish it.
Looking for £2000 - Has cost me over £3000 in parts alone.
Includes:
80x80mm profile alu frame.
Solid 20mm Aluminium bedplate and Gantry uprights.
2.2kW 18000RPM Hertz Spindle (Cost £450 including import taxes etc from Turkey)
Inverter panel
Main control panel
48V PSU
3 x DM542A Microstep Drivers
3 x Nema23 3.0A 23HS9430B Motors 3NM / 425oz
THK HSR30 Profile Rail Bearings on X & Y axis (These are worth over £500)
Profile Round Rail on Z-Axis (I'm also including some Linear Rails and Bearings should you wish to swap - these alone are worth over £150)
1605 Ballscrews on each Axis
HP Laptop with parallel printer port also included (note: battery dead - needs to be plugged in to run)
Mach3 software installed.
Also a box of bits and bobs including limit switches, junction boxes, aluminium plates, 2 boxes of caphead screws, din rail terminals etc etc.
Please note - this machine is VERY heavy and large (I'll fill in specific details later) so you'll need a van and a couple of people to lift.
This machine will cut aluminium (I've used it already to cut some of the parts I then added to it) - I have a couple of videos that I can probably upload to youtube if needed.
It is a very sturdy, well built machine, that's probably 95% complete. Might be a weeks worth of work to finish it completely.
It looks a bit grotty in the photos as I had to disassemble it when we moved house recently and I stuck loads of brown tape around the frame to keep all the bits together - Over the next couple of weeks I'll be cleaning it all up.
Can demonstrate it running.
Collect from Sandiacre, Notts, NG10 - 2 mins from J25 of the M1
Any questions, please feel free to ask.
Photos and updates to follow