PDA

View Full Version : Gskew



schouten_tjeerd
27-07-2009, 11:53 AM
I have written a program which fixes any skew or non-squareness of the router by modifying the g-code. This is very useful when milling double sided pcb's.

Another program is included which calculates machining time.

And yet another which removes parallel lines situated closely together. This is handy when milling fine pitch smd pads.

You are free to host the program on your own site, or provide a link:
program and source (http://pilotpage.monosock.org/fileadmin/files/Gsuite_v1.1.rar)

Tjeerd
(edit: I added some other free gcode tools)

irving2008
27-07-2009, 12:18 PM
I have written a program which fixes any skew or non-squareness of the router by modifying the g-code. This is very useful when milling double sided pcb's.

You are free to host the program on your own site, or provide a link:
http://pilotpage.monosock.org/fileadmin/hidden_files/Gskew_v1.0.rar

source:
http://pilotpage.monosock.org/fileadmin/hidden_files/Gskew_v1.0_source.rar

Tjeerd
Thank you for this.

For the non-programmers amongst us I have attached the readme PDF so you can see if this is of use before downloading it.