SYIL Power Drawbar [Archive]

petemilligan

18-03-2017, 04:36 PM

Clive S

18-03-2017, 05:03 PM

21152

A syil power drawbar. Couldn't find a suitable one given the space. Thought you might be interested in how this turned out. Works really well.
Shout if you want access to the CAD files.

Best,

PeteHi Petemilligan and welcome to the forum. Would you mind put some more pics up of how it works if it is using spring etc. If possible Thanks

petemilligan

18-03-2017, 05:08 PM

Hi Petemilligan and welcome to the forum. Would you mind put some more pics up of how it works if it is using spring etc. If possible Thanks

Sure, Here you go...

21153

petemilligan

18-03-2017, 05:12 PM

& Video

https://youtu.be/1Z9hIX_w8FU

Benja

07-05-2019, 03:50 PM

Hi Pete, after the sad demise of my coventry easy change adaptor, im now looking at other quick change tool syatems for the Syil. I dont suppose you still have the cad files?

petemilligan

07-05-2019, 06:11 PM

Hi Pete, after the sad demise of my coventry easy change adaptor, im now looking at other quick change tool syatems for the Syil. I dont suppose you still have the cad files?

I do. Using Fusion?

Pete

Lee Roberts

07-05-2019, 08:09 PM

I am :playful:

Benja

07-05-2019, 11:58 PM

I do. Using Fusion?

Pete
Fantastic! :D I am as it goes

Is it any old butterfly wrentch or a specific brand/type?

petemilligan

08-05-2019, 06:27 AM

Fantastic! :D I am as it goes

Is it any old butterfly wrentch or a specific brand/type?

Standard old butterfly. You have space & might want to beef up the air piston from the small one I have.
Find a 12 point socket for the drawbar.
Air plumbing (in my case) used 3 air solenoids.
The long strip in the design suits a limit switch to start the wrench.
Cut an internal relief for the piston clamp
Source a couple of linear bearings for the wrench plate travel
The bars were silver steel (what I had in stock at the time), they're holding up fine.

https://a360.co/2J9wMhg

Hope this helps.

Benja

08-05-2019, 09:38 AM

Standard old butterfly. You have space & might want to beef up the air piston from the small one I have.
Find a 12 point socket for the drawbar.
Air plumbing (in my case) used 3 air solenoids.
The long strip in the design suits a limit switch to start the wrench.
Cut an internal relief for the piston clamp
Source a couple of linear bearings for the wrench plate travel
The bars were silver steel (what I had in stock at the time), they're holding up fine.

https://a360.co/2J9wMhg

Hope this helps.

Thats very good of you. thank you :) couldnt understand what you meant then for a sec - so a roller type limit switch will start the wrentch as the piston ends it stroke ? I pretty sure ive got it.

covilite

04-07-2020, 09:30 PM

Hi Pete
Hope you are well. Do you maybe still have the cad files for the drawbar for the syil x5 maybe?
Thanks

Best regards
Tiaan

AndyGuid

05-07-2020, 07:54 AM

Hi Pete
Hope you are well. Do you maybe still have the cad files for the drawbar for the syil x5 maybe?
Thanks

Best regards
Tiaan

Hi Tiaan,

I've noticed that Pete was last on this site over a year ago, but it looks like the CAD files are available via the link https://a360.co/2J9wMhg in post

http://www.mycncuk.com/threads/10780-SYIL-Power-Drawbar?p=108553#post108553

provided you're using Fusion360?

Cheers,
Andy

covilite

05-07-2020, 07:59 AM

Thanks Andy

Hi Tiaan,

I've noticed that Pete was last on this site over a year ago, but it looks like the CAD files are available via the link https://a360.co/2J9wMhg in post

http://www.mycncuk.com/threads/10780-SYIL-Power-Drawbar?p=108553#post108553

provided you're using Fusion360?

Cheers,
Andy