discordian
20-03-2017, 06:30 PM
Hi all
Bit of a novice here!
Looking for a low cost laser for prototyping and low volume fabrication
Need to cut plywood up to 12mm thickness and also acrylic up to 6mm
Cutting area of 1200 x 600mm or greater required
Lots of affordable looking Chinese machines on eBay but don't want to end up with something useless!
HPC seem to be reasonable but a new one is out of budget
Does anyone have a used or modified machine that is reliable enough for my needs?
Or just some advice?!
Based in Hampshire
Thanks :)
Bit of a novice here!
Looking for a low cost laser for prototyping and low volume fabrication
Need to cut plywood up to 12mm thickness and also acrylic up to 6mm
Cutting area of 1200 x 600mm or greater required
Lots of affordable looking Chinese machines on eBay but don't want to end up with something useless!
HPC seem to be reasonable but a new one is out of budget
Does anyone have a used or modified machine that is reliable enough for my needs?
Or just some advice?!
Based in Hampshire
Thanks :)