New member

[spotter_25]

Hello

My name is Juan, i am building a 3 axis cnc machine
i dont know nothing about electronics or this machines, actually i am a lawyer but i like a lot this kind of things so i have just started build my router cnc.

thanks

i hope to learn a lot here.

sorry about my english is not my natural language

https://www.flickr.com/photos/150634700@N04/shares/0XG0WV

[spotter_25]

https://c1.staticflickr.com/5/4265/34698603374_3b111b7d3c_k.jpg (https://flic.kr/p/UScpUj)IMG_20170527_194457 (https://flic.kr/p/UScpUj) by juan Calderon (https://www.flickr.com/photos/150634700@N04/), en Flickr

[spotter_25]

https://c1.staticflickr.com/5/4262/35500920896_b9d0c10b36_k.jpg (https://flic.kr/p/W66uX3)IMG_20170625_190615 (https://flic.kr/p/W66uX3) by juan Calderon (https://www.flickr.com/photos/150634700@N04/), en Flickr

https://c1.staticflickr.com/5/4259/35539964025_8e64dea13f_k.jpg (https://flic.kr/p/W9xB7r)IMG_20170528_195618 (https://flic.kr/p/W9xB7r) by juan Calderon (https://www.flickr.com/photos/150634700@N04/), en Flickr

[spotter_25]

any advice is welcome
i dont know what to do after finish the 3 axis gantry.
i dont know how to plug the electronics

[Clive S]

Hello

My name is Juan, i am building a 3 axis cnc machine
i dont know nothing about electronics or this machines, actually i am a lawyer but i like a lot this kind of things so i have just started build my router cnc.

thanks

i hope to learn a lot here.

sorry about my english is not my natural language

https://www.flickr.com/photos/150634700@N04/shares/0XG0WV

Hi Juan. Welcome to the forum.
Well and please don't take this the wrong way. I would STOP and don't do any more until you have an understanding of what you want to achieve.

Tell us what you want to cut with this machine as it is not a good design and you will waste a lot of money with the way you are going about it.

You are not the first to get it wrong. So start a build log to keep all the questions in one place and then have a read through an look what other have done with their designs. Good luck with the build.

[spotter_25]

Hi Juan. Welcome to the forum.
Well and please don't take this the wrong way. I would STOP and don't do any more until you have an understanding of what you want to achieve.

Tell us what you want to cut with this machine as it is not a good design and you will waste a lot of money with the way you are going about it.

You are not the first to get it wrong. So start a build log to keep all the questions in one place and then have a read through an look what other have done with their designs. Good luck with the build.


well i want to shape polystyrene and polyurethane foam
from a block to a 3d figure.