bosch rexroth 90mm2 legs x4 plus some 90 by 45 lengths - oh and a complete y gantry

[nobby]

oh and a tiddler for a z

oh and another long one for an x

oh and some sides machined up

[Chaz]

Do you have CAD files for what you need machined? Ill take a look if I can do them for you. Ill PM you my email address.

[nobby]

Do you have CAD files for what you need machined? Ill take a look if I can do them for you. Ill PM you my email address.

I don't have any files
havn't even got the bits on their way -4 july usa holidays

no-one have a complete enclosure in Rexroth shizzle

able to be sound proofed and filtered

[Desertboy]

Are you in US? Because nearly everyone here is in UK.

If you just want aluminium profile cutting and drilling you should just ask the supplier they will be able to do this.

You will need to produce drawings for them if I were you I'd start work on my drawings before anything else you should not need the parts to draw them.

I was trying to make my cnc with minimal drawings but in the end I'm going to have to draw the entire machine for it to actually work, I could make it without drawing in cad but it would cost 20% more because of fucks ups.

T slot extrusion cad models for bosch are here
http://www13.boschrexroth-us.com/partstream/Load_Category.aspx?category=Aluminum%20Framing&menu=1,0,0

KJN in UK will happily sell you a prebuilt enclosure but it will not be cheap, they can even double glaze it for you for sound proofiing.