View Full Version : Emco Turn 55 - CamConcept Error - 6014 No Main Spindle Speed

26-10-2017, 05:13 PM
Dear all

I am new to using the PC Turn 55 running Camconcept software connected via Ethernet.

I have not been able to get the spindle to spin up. I do not know what I am doing wrong in inputting spindle speed. When I attempted to run a program, the lathe turret will rotate to the correct tool and move itself into position and then I can hear a soft high pitch sound from the lathe followed by this message "Turning Cycle 6014 No main spindle speed".

I have input the spindle speed for roughing and finishing in the tools section. Am i missing something?

The Emco Camconcept user manual is the absolute worse manual I have ever come across. it does not explain anything!

Please help. I cannot get the spindle to spin.