View Full Version : WANTED: Emco PC turn 120/125/155 or Emco Concept turn 105
Maxiscnc
17-03-2018, 02:06 AM
Hello,
I’m looking for an Emco PC turn 120/125/155 or Emco Concept turn 105. Prefer to be in it’s original shape and controller without conversions and in good mechanical condition. Any offers are welcome :)
Thank you
Angel
thewhitegoth
24-10-2019, 04:16 PM
Hi, I know it's an old post but we've got a PC Turn 120, unmolested, with the PC. I was going to convert it over to LinuxCNC but we already have a converted Boxford which does everything the Emco does. Fanuc controls installed currently. We also have a PC Mill 100 but without the PC which is also destined for conversion. Let me know if you're interested. We're 15 mins from Fareham.
Hello. Do you still have these machines available? Thank you!
thewhitegoth
11-04-2020, 09:10 AM
Hello. Do you still have these machines available? Thank you!
Hi, yes I do. We've tracked down a PC for the PCMILL100 and were going to put them both back into service. They're still for sale though.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.