3 Axis servo motor drive

[petesurrey]

Hi am looking to sell my CNC router parts.
I have 3 servo drives with matched motors 1.5kw with 110mm frame size http://www.xinje.com/en/ProductView.asp?ID=223&SortID=177

They have been running my router for 1 year now and work really well. I have another machine running the same drives but with 130 frame motors and ive had that fro 3 years never had any problems.

I bought this set face to face in China and they are really good quality. I am open to offer for the full set of three. I do have another as well so in total 4 sets but the 4th set is brand new.

The drives can accept a wide range of inputs including step directions as well ad differential. They can also accept analogue drive as well.

These would be perfect for a Bridgeport mill conversion and be really accurate as they have 2500ppr encoders so closed loop.

Let me know if you are interested.

[audioandy]

What kind of price you looking for Pete?

[Chaz]

I may also be interested in some, price pending.

[petesurrey]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

[Chaz]

probably looking at 800 for the 3 axis setup.

I also have a HSD spindle with ISO 30 ATC

What model HSD? Cost?

[johnsattuk]

I also have a HSD spindle with ISO 30 ATC

Can you give model no etc. Pics?

[petesurrey]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

[Chaz]

Ok guys its an ES919 ISO 30 spindle 24k rpm. I do have VFD that runs it from single phase. This spindle new in 5-6k and they are really worth it i can happily take 10mm DOC in marine ply with 25mm dia cutter at 3m/min. I do also have 15 tool holders er32 as well as the tool change forks that catch the tool.

video here:
https://www.youtube.com/watch?v=nwpfh3fwHfw
https://www.youtube.com/watch?v=fc9yb6pCzYA

Cost?

[Chaz]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

[petesurrey]

This is mildly frustrating. I know everyone is busy but you post stuff for sale, people express an interest, but no response ....

i am sorry i have been in paris with work.

If you are interested make me an offer.

[johnsattuk]

Can you give a bit more info on the spindle as there are several variations of the 919.

KW ??
Voltage ??
2 pole, 4 pole ??

Pic of the rating plate would help.

[petesurrey]

Can you give a bit more info on the spindle as there are several variations of the 919.

KW ??
Voltage ??
2 pole, 4 pole ??

Pic of the rating plate would help.

Here are the specs:
2 pole
380v or 220v
24krpm
model number is ES919A 2P 08,00kw

[Chaz]

Hi am looking to sell my CNC router parts.
I have 3 servo drives with matched motors 1.5kw with 110mm frame size http://www.xinje.com/en/ProductView.asp?ID=223&SortID=177

They have been running my router for 1 year now and work really well. I have another machine running the same drives but with 130 frame motors and ive had that fro 3 years never had any problems.

I bought this set face to face in China and they are really good quality. I am open to offer for the full set of three. I do have another as well so in total 4 sets but the 4th set is brand new.

The drives can accept a wide range of inputs including step directions as well ad differential. They can also accept analogue drive as well.

These would be perfect for a Bridgeport mill conversion and be really accurate as they have 2500ppr encoders so closed loop.

Let me know if you are interested.

Did you end up selling these motors? Im about to pick up a Bridgeport and if these fit will be interested.

[petesurrey]

Hi Im am really trying to sell then all as part of the machine but will break if i have to

[Chaz]

Hi Im am really trying to sell then all as part of the machine but will break if i have to

Part of which machine? Can you PM me your number? Would be easier to talk through. Thanks.

[petesurrey]

Part of which machine? Can you PM me your number? Would be easier to talk through. Thanks.

see my other for sale item its a cnc router

[Chaz]

see my other for sale item its a cnc router

Ok, but when you posted these for sale there was no mention of it being part of a router. Hence my surprise.

Anyways, cash waiting for motors that I can use on my bridgeport.

[Chaz]

see my other for sale item its a cnc router

Seeing as your router looks like it might be sold, do you now know if you have servos for sale or not?

You say they are 110 Frame Size (Bridgeport replacements), what shaft sizes are the motors?

Thanks

[petesurrey]

Hi the router is not sold although a few interested parties. I have 1 110 frame motor with 19mm keyed shaft and one 130 frame motor with 22mm keyed shaft.

[Chaz]

Hi the router is not sold although a few interested parties. I have 1 110 frame motor with 19mm keyed shaft and one 130 frame motor with 22mm keyed shaft.

Thanks. I need three motors / controllers ideally.