komatias
25-05-2018, 10:05 AM
Advertised on ebay as well as price drop for anyone wanting to buy directly.
Hi all, we are going to be selling our milling machine in June to make way for the new fully enclose one I have bought.
It was built to my spec base by the Chinese factory.
It is with full GSK controller, servos and stand with coolant pump. I will be including some TTS type holders, 2 vices and of course all the manuals. A set of heavy duty castors will also be thrown in.
Not had many hours and barely run in.
Runs on single-phase
As this is a business sales, a VAT invoice will be issued.
https://lh3.googleusercontent.com/vQcRuTX2DJyaWDOihqwDruO4uCsZki7aqGlGDkJchYpU7YjdXq 2I8YvA5kP5HorPoVbOizslP-BuVI_eCOc1KkgMtjRT_nFZ0gS0Ydj-CtHSyFOyDdr6CfCObjCUFthd4nSJ5tBf3nwjqOxwNJUDhx9ySb cjqQ5eOGdI6jaMC7cKfjAozGciKenFJWcPTJdSKEBRU4zfNoMK w2mQBBX-dG89IHsMka9Jdlq3AZTHLU_qRDr1zr5OEv3MuWijhJSfwXkH8I Ow7ZUUVyIL4God_gN1o96l3YLUURa4Imf0wvLHUX7DDyAG4HYE ODudNJHtnjiG0KCl5N_Qi7UQHj4MuXgmjqbcyiisBWASub-bsVltA67YY-h6X_1h9ayJYUTQJTTawYMoZaPLNGpRgrZyq44c_q7bhC46_JG8 xatg9RKK3m2cbnyOt4MqZ2Z9CzBb9C0MOjbsc_7y7zN2w3Igx7 3PO_rreT1YD8bNFHgAgr6dDZzg4uQjvj7oKWCL5SJJJLCDrqDj 7X9NOIwQ95_RsUI3ZH2pMKvMPoPhcPdWICxkKV6Axbh0XG9JIc EAW-yQ8OYix2JYM3P0QZUOUqaQr6xyTV-Otm0Dgf_qTGQNwoy2YfeDTCuF93OUo6OHANcLaOzTwQ698GNgW uA-pc5d9TDpX6ltvlAt=w1547-h870-no
I also have CAD for an enclosure, ATC and other goodies but never got round to making them.
you can find the videos of the machine and more photos here:
https://goo.gl/photos/opBkPyJDqQ8BoyaaA
The working envelope is 450x300x280 (they mislabled the bloodything at the factory)
Rapids up to 6000mm/min possible but I have limted this to 4000mm/min for safety
Italian electronic oil pump was added when the handle of the chinese one broke. This is controlled by the CNC controller.
Spindle motor 2.2kW (Novakons and Tormachs have half that)
Can be view running and cutting in Bristol.
Hi all, we are going to be selling our milling machine in June to make way for the new fully enclose one I have bought.
It was built to my spec base by the Chinese factory.
It is with full GSK controller, servos and stand with coolant pump. I will be including some TTS type holders, 2 vices and of course all the manuals. A set of heavy duty castors will also be thrown in.
Not had many hours and barely run in.
Runs on single-phase
As this is a business sales, a VAT invoice will be issued.
https://lh3.googleusercontent.com/vQcRuTX2DJyaWDOihqwDruO4uCsZki7aqGlGDkJchYpU7YjdXq 2I8YvA5kP5HorPoVbOizslP-BuVI_eCOc1KkgMtjRT_nFZ0gS0Ydj-CtHSyFOyDdr6CfCObjCUFthd4nSJ5tBf3nwjqOxwNJUDhx9ySb cjqQ5eOGdI6jaMC7cKfjAozGciKenFJWcPTJdSKEBRU4zfNoMK w2mQBBX-dG89IHsMka9Jdlq3AZTHLU_qRDr1zr5OEv3MuWijhJSfwXkH8I Ow7ZUUVyIL4God_gN1o96l3YLUURa4Imf0wvLHUX7DDyAG4HYE ODudNJHtnjiG0KCl5N_Qi7UQHj4MuXgmjqbcyiisBWASub-bsVltA67YY-h6X_1h9ayJYUTQJTTawYMoZaPLNGpRgrZyq44c_q7bhC46_JG8 xatg9RKK3m2cbnyOt4MqZ2Z9CzBb9C0MOjbsc_7y7zN2w3Igx7 3PO_rreT1YD8bNFHgAgr6dDZzg4uQjvj7oKWCL5SJJJLCDrqDj 7X9NOIwQ95_RsUI3ZH2pMKvMPoPhcPdWICxkKV6Axbh0XG9JIc EAW-yQ8OYix2JYM3P0QZUOUqaQr6xyTV-Otm0Dgf_qTGQNwoy2YfeDTCuF93OUo6OHANcLaOzTwQ698GNgW uA-pc5d9TDpX6ltvlAt=w1547-h870-no
I also have CAD for an enclosure, ATC and other goodies but never got round to making them.
you can find the videos of the machine and more photos here:
https://goo.gl/photos/opBkPyJDqQ8BoyaaA
The working envelope is 450x300x280 (they mislabled the bloodything at the factory)
Rapids up to 6000mm/min possible but I have limted this to 4000mm/min for safety
Italian electronic oil pump was added when the handle of the chinese one broke. This is controlled by the CNC controller.
Spindle motor 2.2kW (Novakons and Tormachs have half that)
Can be view running and cutting in Bristol.