PDA

View Full Version : yaskawa SVDG-7RA


alaamomen9
29-06-2018, 07:26 AM
I have cnc router have 3axis when I see control unit I see it have 5drivers instead of 3
3 of them have same thickness and 2 have another thickness
what is the role of small drivers !?https://uploads.tapatalk-cdn.com/20180629/654d4dae49a9428be46857b3e17e0a66.jpg

Sent from my ASUS_Z00A using Tapatalk
Chaz
29-06-2018, 10:27 AM
Follow the motor cables to the motor, that will tell you.

5 drivers could be for dual motors for Y (or X)? Is there a 4th axis? Is the spindle controlled by a drive?
alaamomen9
29-06-2018, 10:30 AM
Follow the motor cables to the motor, that will tell you.

5 drivers could be for dual motors for Y (or X)? Is there a 4th axis? Is the spindle controlled by a drive?no spindle have dedicated VFD
so If I have dual Y
Can I connect on the same output from interface board!!?
RichAuto Dsp A15 https://uploads.tapatalk-cdn.com/20180629/93ebeba95ce77c1510a7aa23221cb165.jpg

Sent from my ASUS_Z00A using Tapatalk
Chaz
29-06-2018, 10:33 AM
no spindle have dedicated VFD
so If I have dual Y
Can I connect on the same output from interface board!!?
RichAuto Dsp A15 https://uploads.tapatalk-cdn.com/20180629/93ebeba95ce77c1510a7aa23221cb165.jpg

Sent from my ASUS_Z00A using Tapatalk

I dont know, not done any slave connectivity before. Im sure JazzCNC or others will offer some guidance.
Clive S
29-06-2018, 12:41 PM
so If I have dual Y
Can I connect on the same output from interface board!!?

What do you mean by "If I have dual Y " you either have or have not!!

You have not answered Chaz re "follow the motor wires from the drives"

Pic off the machine might help. more info required
alaamomen9
30-06-2018, 05:12 PM
What do you mean by "If I have dual Y " you either have or have not!!

You have not answered Chaz re "follow the motor wires from the drives"

Pic off the machine might help. more info requiredmanufacturer has used dsp0501
when I see manual of dsp It was support step motor only !!
so what is corrert manfacturer or manual !!?https://uploads.tapatalk-cdn.com/20180630/890054bad4184c0f581340a38a696ca5.jpghttps://uploads.tapatalk-cdn.com/20180630/84fb5235f17f41c98e0a8ac62ff34f78.jpghttps://uploads.tapatalk-cdn.com/20180630/f054bceec3b01ad0e4356ec12ff92f51.jpghttps://uploads.tapatalk-cdn.com/20180630/5c79681dbb34f5ffc8aed79e1201fcfd.jpghttps://uploads.tapatalk-cdn.com/20180630/f41d28e465d91fdad1f55b0c97cfa7b4.jpg

Sent from my ASUS_Z00A using Tapatalk