PDA

View Full Version : FOR SALE: FOR SALE Emco Pc Mill100 CNC milling machine, as new condition



Maxiscnc
12-07-2018, 10:29 AM
Hello everyone,

FOR SALE

Emco Pc Mill 100 CNC milling machine, in brilliant used condition. Price include VAT and invoice will issued
Have been used very little in a secondary school in Sweden. In very low hours never in industrial production.
As you can see on the picture of operators panel, it looks like have been used just for few times.
The machine has been greased and oiled with the original lubricants recommended by Emco.
Very precision small machine. Can fit in garage

Price: £5500 incl VAT ( loaded on truck )

Some machine details:

- 10 tools automatic tool changer
- 11 tool holders in total ( include 1x shell end mill arbor and 1x Z axis 30mm zero finder )
- central lubricating system
- coolant device with pump
- Original software +MSD ( hardware machine data ) disk and license key for Siemens and Fanuc controllers
- Siemens 810/820 controller preinstalled
- Fanuc 0 controller ( need Fanuc opreators panel - not included but can be find on Ebay for app £150 )
- Machine manual and maintenance
- Electrical documentation
- Service parts documentation
- Software manual
- Emco protocol of proof
- 3 phase power. Compressed air inlet.
- Can be retrofitted to Mach3 but I recommend the original controller.
- The only problem with this machine is a missing plastic knob on the rotary main power switch. The switch itself included and works as have to be.

Can be seen under power and working with the NC programs already in the HDD but I have not much knowledge with programming.
You can test it by yourself on our site.
Collection only please at PO16

Thank you

Robert955
28-01-2019, 03:35 PM
Hey I’ve seen this machine on eBay and in my search for specs found it here. Would you give me a pm as I don’t think I can being as I’ve just signed up.

Maxiscnc
29-01-2019, 08:09 AM
Hi, did you received the pm? Thanks

voaferro
31-05-2019, 06:01 PM
-Good day! We have read this advert of a EMCO PC-MILL 100, seen the photos... We are located in Porto-Portugal,
We´re looking for something like this... Do you know how much the transportation might be worth? Another doubt is that the software is complete & the machine is tested.. (is it?) ...
- We could not be certain that the year of manufacture was 1997... (not clear in photo)...
- We are a manufacturing firm that has uses for a ´small´ machine as this, & we´re interested in it as a backup....


A.Ferreira (on behalf of C.Faria)

Maxiscnc
01-06-2019, 12:46 AM
Hello,
Unfortunately the machine was sold. Thank you for your interest on it. It’s now in Spanish school. Wish you to find a good machine soon. Thanks again!
Angel