HSD Spindle 6.8kw iso30

[IN-WondeR]

******* SOLD OUT *******



I have 2 used HSD Spindles which I have pulled from a Biesse Rover 336

They are with iso30 taper for a full ATC setup.

They are 6.8kw, and comes with 20 meters of mains cable.

I can ship to all of Europe, bear in mind, these are heavy, roughly 30kg a piece plus the cable, so it's not going to be cheap to ship.

They sound to be in good working condition, bearings sounds ok, spins freely, drawbar mechanism works perfectly.

Machine had been running up til a few months ago, removed from production because of a new purchase.

I'm asking €900 each, which is cheap. These are €4000 spindles, so they are quite expensive new.

It's the two spindles in the left side of the picture.

Have a look and contact me in PM or comment and I'll answer as soon as I can.

They are in Denmark, so shipping to all of EU and the UK is possible.. :)

2454324544

[battwell]

any left?

[IN-WondeR]

Yes still one left.

[battwell]

which one is left?- black lower collar on right or silver collar on left

[IN-WondeR]

Silver on the left. Only the ones on the left were for sale.

[Danholmes06]

Hi do you have the inverter for this too?

[IN-WondeR]

I have the inverter that was mounted on the biesse cnc. However I do not know if it works.

I do have an Omron (hitachi) 15kw inverter with brake resistor and line filter.

It’s gonna cost another €475 as it’s like new.

[PLIP5]

Are they still available?

[IN-WondeR]

1 spindle available.

[PLIP5]

Does it come with the vfd? How much?

[IN-WondeR]

A couple posts up is the answer.

[IN-WondeR]

All gone. Sold out