drumsticksplinter
19-07-2018, 10:44 PM
Hi, I'm looking to sell this 3 axis lab robot. I bought it because I was interested in turning it into a 3d printer, or even a plasma cutter crossed my mind. Its sat unused for over a year and I now need the space and funds to complete another retrofit.
The machine has travels of 590 x 330 x 140mm. It is driven by stepper motors (nema 24 I think), x and y have encoders on them. All axes have high quality profile linear rails and the whole machine is very well built indeed. The machine does actually power up and go through a homing sequence, but it would take some electrical ingenuity to run any kind of cnc application with the stock control system I'd imagine.
I'm looking for around £300 or would consider a CS Labs CSMIO/IP-M, which is what I'll buy anyway with the sale funds.
24561 24562 24563
The machine has travels of 590 x 330 x 140mm. It is driven by stepper motors (nema 24 I think), x and y have encoders on them. All axes have high quality profile linear rails and the whole machine is very well built indeed. The machine does actually power up and go through a homing sequence, but it would take some electrical ingenuity to run any kind of cnc application with the stock control system I'd imagine.
I'm looking for around £300 or would consider a CS Labs CSMIO/IP-M, which is what I'll buy anyway with the sale funds.
24561 24562 24563