View Full Version : Artcam pro 8 setting up tool paths for correct z height

18-08-2018, 09:24 AM
Good morning everyone!

I am in dire need for assistance..

My aim is to get a design cut out without it cutting into the design..

I have tried to adjust the start and finish depth, adjusted the origin on ncstudio but it's either too high or too low....

Please see the images....

Thanks in advance [emoji1]https://uploads.tapatalk-cdn.com/20180818/f1ae15fe2f8f1810c635fb3d269374d5.jpghttps://uploads.tapatalk-cdn.com/20180818/8b690036f19d7cb3a3e96871ce9db846.jpghttps://uploads.tapatalk-cdn.com/20180818/5403068c12e48d11e0b838999451c28a.jpghttps://uploads.tapatalk-cdn.com/20180818/e0b562e657ce90746ecf03ed6c9e2eb0.jpghttps://uploads.tapatalk-cdn.com/20180818/96eab35fb034143fe80488e2bb2d2a20.jpg

Sent from my SM-G965F using Tapatalk