PDA

View Full Version : WANTED: Adjustable Tailstock


Leadhead
24-09-2018, 02:47 PM
Wanted Adjustable Tailstock with nominal 100mm centre height. Can be scruffy even a project if you have some bits.
mekanik
24-09-2018, 03:29 PM
Hi Leadhead
A bit more detail might get a better responce, is it for a 4th axis or a lathe ?
Regards
Mike
Leadhead
24-09-2018, 04:08 PM
Just for rotary table accessory. Nothing fancy required. I made a mistake the nominal centre height is 100mm.