matconstable
04-11-2018, 09:57 AM
I’m looking to invest in a machine that can handle fine engraving work on ABS (as pictured) but that can also handle cutting up to 4mm Acrylic and 18mm MDF.
I had been looking at some of the Openbuilds machines but after reading some other threads, it seems like they are not the way forward.
The budget is up to 2k but no more. I would be hoping that it could handle 500 - 1000 small engravings a month.
I realise that the question will have been asked a thousand tines before but searching back theough the forum I couldn’t find anyone with similar requirements to my own.
Thanks in advance for any help you can give.
Matt
https://uploads.tapatalk-cdn.com/20181104/75a7c127d3713dbfde72b679d738a975.jpg
Sent from my iPhone using Tapatalk
I had been looking at some of the Openbuilds machines but after reading some other threads, it seems like they are not the way forward.
The budget is up to 2k but no more. I would be hoping that it could handle 500 - 1000 small engravings a month.
I realise that the question will have been asked a thousand tines before but searching back theough the forum I couldn’t find anyone with similar requirements to my own.
Thanks in advance for any help you can give.
Matt
https://uploads.tapatalk-cdn.com/20181104/75a7c127d3713dbfde72b679d738a975.jpg
Sent from my iPhone using Tapatalk