View Full Version : Wiring of HY vfd unit
terry1956
07-11-2018, 03:20 PM
Hi I have a old vfd unit purchased off eBay some years back. It’s the HY unit still sold on eBay. I have mislaided the wiring diegram so if anyone can let me know which wire goes in which fitting that would be nice. I am in the UK so it’s the live, neutral, earth power cable.the unit as the following cable fittings. R,S,T,P+,PR,U,V,W and earth. Thanks for help.
Clive S
07-11-2018, 05:23 PM
Hi I have a old vfd unit purchased off eBay some years back. It’s the HY unit still sold on eBay. I have mislaided the wiring diegram so if anyone can let me know which wire goes in which fitting that would be nice. I am in the UK so it’s the live, neutral, earth power cable.the unit as the following cable fittings. R,S,T,P+,PR,U,V,W and earth. Thanks for help.
R,S,T live and neutral any two I use R&T U,V,W spindle one cable to each. If the spindle rotates the wrong way reverse any two of U,V,W
P+&PR I think are the connections for a braking resistor not normally used.
terry1956
07-11-2018, 05:59 PM
thanks, hope it works
routercnc
07-11-2018, 09:40 PM
General spindle info here from Husky's great thread:
http://www.mycncuk.com/threads/5814-The-2-2Kw-Chinese-Spindles-Info-Setup-and-Advice-More
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.