ROYCLEANGROW
07-02-2019, 06:36 PM
Hi
I need these parts made regularly.
The short ones we need a few hundred ( really need a few asap even 50 )
For the long versions, about 50 to 100 would do for now.
We put a copper wire (attached to a pogo pin) in and then do some other modifications in the short ones (38mm). 2 - orings 1mm x 2.5 mm OD BS607 go on the 2 grooves on the thin end to secure them in place and seal them.
the file upload didnt work,
they can be downloaded here https://drive.google.com/drive/folders/1maEj5gkKlPkjm_GWIqlsK1y5pRdoQk9s?usp=sharing
Thanks
Roy
I need these parts made regularly.
The short ones we need a few hundred ( really need a few asap even 50 )
For the long versions, about 50 to 100 would do for now.
We put a copper wire (attached to a pogo pin) in and then do some other modifications in the short ones (38mm). 2 - orings 1mm x 2.5 mm OD BS607 go on the 2 grooves on the thin end to secure them in place and seal them.
the file upload didnt work,
they can be downloaded here https://drive.google.com/drive/folders/1maEj5gkKlPkjm_GWIqlsK1y5pRdoQk9s?usp=sharing
Thanks
Roy