Wooddesign
10-03-2019, 09:27 PM
Hello everyone,
Please could I have some help. I am trying to complete my machine. I have my router working in three axis and with one motor/gearbox slaved in Mach 3 for the X axis.
I am using Mach 3 and a CS LABS IPM controller. The proximity sensors for the end points are IFS204 type sensors. I hope I have wired them into the digital inputs correctly.
If anyone could give me a step by step rundown of the wiring and set up in Mach 3 that would be really appreciated. Please just remember I cut wood for a living not send rockets to Mars so please keep it simple as possible.
Many thanks
Steve
Ps. I've included some photos for interest / reference.
Please could I have some help. I am trying to complete my machine. I have my router working in three axis and with one motor/gearbox slaved in Mach 3 for the X axis.
I am using Mach 3 and a CS LABS IPM controller. The proximity sensors for the end points are IFS204 type sensors. I hope I have wired them into the digital inputs correctly.
If anyone could give me a step by step rundown of the wiring and set up in Mach 3 that would be really appreciated. Please just remember I cut wood for a living not send rockets to Mars so please keep it simple as possible.
Many thanks
Steve
Ps. I've included some photos for interest / reference.