liamo1991
01-04-2019, 03:19 PM
Unfinished CNC/3D printer project. The main frame is a Stratasys Genisys industrial printer. Strong solid cast metal frame with strong linear rail and stepper motors. I had planned to retrofit it into a bench top CNC router and retrofit the printer with reprap 3d printer electronic and extruder to use standard printer filament. And have a duel machine. A few people have retrofitted these printers with reprap type printer electronics since I started a fourm discussion on line. I done have the space at my place and would like to free up the space at home or time to finish the project unfortunately.
I can get a price for shipping it to The UK if there is interest.
Axis travel distance; Y 250mm, X 410 mm and Z280mm
Heated bed size; 230mm x 395mmx
Machine size; 80cm deep, 72cm high, 92cm wide
CNC controls x2 (one never used, one second hand)
Ramps 1.4 3D printer control board
3x stepper controllers
24v power supply
30v power supply
3D printer extruder
24volt spindle.
£1300
25617 25618 25619 25620 25621 25622 25623 25624
I can get a price for shipping it to The UK if there is interest.
Axis travel distance; Y 250mm, X 410 mm and Z280mm
Heated bed size; 230mm x 395mmx
Machine size; 80cm deep, 72cm high, 92cm wide
CNC controls x2 (one never used, one second hand)
Ramps 1.4 3D printer control board
3x stepper controllers
24v power supply
30v power supply
3D printer extruder
24volt spindle.
£1300
25617 25618 25619 25620 25621 25622 25623 25624