russmx
12-04-2019, 06:16 PM
Hello all,
I'm currently working on a PC modding project and need to CNC a water distribution block.
The parts are
322 x 140 mm, 1 is 10mm thick, the other is 6mm thick
I'm looking to make these out of clear acrylic perspex.
I've attached the files for reference. I have some BSP G1/4 threads, but if you're not able to thread them, I'm more than happy to thread by hand.
https://drive.google.com/file/d/1atMpkhrVYXFrO93gwZie3qNBNTDPEsBR/view?usp=drivesdk
https://drive.google.com/file/d/1dgvlFah92Y2ICQh9APf2KMfLRvesBjLD/view?usp=drivesdk
My budget isn't huge, ideally up to £200, but if you can justify why it would be more I'd be happy to pay more.
Thanks a lot!
Russ
Sent from my SM-G975F using Tapatalk
I'm currently working on a PC modding project and need to CNC a water distribution block.
The parts are
322 x 140 mm, 1 is 10mm thick, the other is 6mm thick
I'm looking to make these out of clear acrylic perspex.
I've attached the files for reference. I have some BSP G1/4 threads, but if you're not able to thread them, I'm more than happy to thread by hand.
https://drive.google.com/file/d/1atMpkhrVYXFrO93gwZie3qNBNTDPEsBR/view?usp=drivesdk
https://drive.google.com/file/d/1dgvlFah92Y2ICQh9APf2KMfLRvesBjLD/view?usp=drivesdk
My budget isn't huge, ideally up to £200, but if you can justify why it would be more I'd be happy to pay more.
Thanks a lot!
Russ
Sent from my SM-G975F using Tapatalk