Nealieboyee
04-06-2019, 01:13 PM
Hi all,
After finishing my build, I have one metre of 20mm profile linear rail and two ballscrews around 400mm long. Will confirm ballscrews length when I get home but they're both 1605 and have the fixed bearing end machined. Other end is cut off. All of these were bought from Fred at BST Automation last year.
Looking for a good home to a mycncuker. Would prefer if someone took it to use it rather than flog it.
Just the ballscrews alone would be enough to do the X and Z axis on a small machine or mill.
Cheers
Neal
After finishing my build, I have one metre of 20mm profile linear rail and two ballscrews around 400mm long. Will confirm ballscrews length when I get home but they're both 1605 and have the fixed bearing end machined. Other end is cut off. All of these were bought from Fred at BST Automation last year.
Looking for a good home to a mycncuker. Would prefer if someone took it to use it rather than flog it.
Just the ballscrews alone would be enough to do the X and Z axis on a small machine or mill.
Cheers
Neal