DaveC
02-08-2019, 01:03 PM
Hi all
I have got into CNC by accident through my model engineering interest. I have a Wabeco mill running Mach3 and I am just about getting the hang of it.
I have also just recently bought an old Denford Starturn also running Mach 3 which I am trying to learn ( Slowly )
Very interested in learning as much as I can and would really like to become a lot better and more knowledgable.
Pipedream would be to eventually convert a larger lathe to CNC but at present would not have a clue where to start.
Be great to hear from anybody who can offer any advice or tips on anything once I start posting all my problems.
Thanks in advance
Dave
I have got into CNC by accident through my model engineering interest. I have a Wabeco mill running Mach3 and I am just about getting the hang of it.
I have also just recently bought an old Denford Starturn also running Mach 3 which I am trying to learn ( Slowly )
Very interested in learning as much as I can and would really like to become a lot better and more knowledgable.
Pipedream would be to eventually convert a larger lathe to CNC but at present would not have a clue where to start.
Be great to hear from anybody who can offer any advice or tips on anything once I start posting all my problems.
Thanks in advance
Dave