willower
15-09-2019, 07:54 AM
Geckodrive G540 Stepper Motor Controller . Condition is Used.
Selling my very lightly used G540 Controller due to closing down my hobby CNC activities. An excellent controller (arguably - the best) which I have used maybe once a month since I purchased it 2 1/2 years ago. There are plenty of support videos available on youtube to help with setup - but it does require a computer with a 25 pin printer port to run it - it will not run from a USB connection.
The only mark on it is where I sanded away the anodised finish on the top right mount hole, just to make absolutely sure I had a good 'ground' connection to the same 'ground' as the computer.
I would highly recommend that you study very carefully the G540 Manual at https://www.geckodrive.com/amfile/file/download/file_id/22/product_id/14/ before purchase. There is a wealth of information there regarding the correct install and setup of this driver.
Please contact me if interested - price negotiable....
Selling my very lightly used G540 Controller due to closing down my hobby CNC activities. An excellent controller (arguably - the best) which I have used maybe once a month since I purchased it 2 1/2 years ago. There are plenty of support videos available on youtube to help with setup - but it does require a computer with a 25 pin printer port to run it - it will not run from a USB connection.
The only mark on it is where I sanded away the anodised finish on the top right mount hole, just to make absolutely sure I had a good 'ground' connection to the same 'ground' as the computer.
I would highly recommend that you study very carefully the G540 Manual at https://www.geckodrive.com/amfile/file/download/file_id/22/product_id/14/ before purchase. There is a wealth of information there regarding the correct install and setup of this driver.
Please contact me if interested - price negotiable....