Wiring an Omron R88M U10030VA - S1 to a Yaskawa TRD-Y2048 encoder

[Snowy]

Good morning,

I know it's a long shot but i have come across some motors and encoders that have been 'chopped' out of something and i'm looking for assistance for re-wiring.

Motor
Omron R88M U10030VA - S1

Encoder
Yaskawa TRD-Y2048

If anybody could provide electrical drawings or paperwork for these i'd be most grateful. They are old enough to have dropped of the list of readily available / supported documentation.

Alternatively if there is some standardisation in the colour schemes for encoder/motor i'd be willing to risk it for a biscuit!

Cheers
Snowy

[Lee Roberts]

Hi Snowy,

I've attached to this post the Omron User's manual for the Omnuc U-Series servo motors and the servo driver units, this document covers the wiring of the R88M-U servo motors and the R88D-UA servo driver units, hopefully this should give you what you need.

Chapter 2. Looks like your friend ;-)

Hobnobs...the blue ones!...

[Snowy]

Cheers for that.
I'll maybe be able to see if i can get them to turn but probably need to find different encoders

Blue ones you say.............