View Full Version : NEW MEMBER: Busellato Optima manufactured in 1998
Castlepower
06-10-2019, 10:58 AM
Good morning Everyone
I am a new member and trust I am placing this post in the correct place. I am trying to build a replacement computer for a Busellato Optima CNC, the computer is currently running Windows 95 and I do not have the original install disks. I have contacted Busellato service and they say they have lost their copy. Does anyone on the forum have a copy of these disks.
Best wishes
Chris Keohane
phill05
06-10-2019, 04:09 PM
Hi Chris,
Your lucky thrown them in the recycle bin yesterday got them out now, let me have a contact e-mail please I have win 95, 2 off win 98 disks and boot disks also books with certificate install codes for each.
Phill
Castlepower
06-10-2019, 06:23 PM
Hi Chris,
Your lucky thrown them in the recycle bin yesterday got them out now, let me have a contact e-mail please I have win 95, 2 off win 98 disks and boot disks also books with certificate install codes for each.
Phill
Good afternoon Phill
Many thanks for your reply, I hope that I am writing in the correct place and was not expecting a positive response so quickly. My address is as detailed below.
Castlepower Electronics
Dunbeggan
Dromore
Bantry
Co Cork
Ireland P75 PK44
Once again many thanks
Chris Keohane
Castlepower
06-10-2019, 06:27 PM
Good afternoon Phill
Many thanks for your reply, I was not expecting a positive response so quickly. I trust I am replying in the correct place this time, my address is as detailed below
Castlepower Electronics
Dunbeggan
Dromore
Bantry
Co Cork
Ireland
P75 PK44
Once again many thanks for taking the time to reply and retrieve the Disks
Castlepower
06-10-2019, 06:29 PM
Sorry Phill
I forgot the email address of my reply
[email protected]
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.