X3 Super CNC Machine £1920 inc VAT

[Gary]

X3 Super that has been converted to CNC with the Ending CNC ethernet controller, AM882 drivers, 68V power supply and coolant kit.

Working and just needs a PC or Laptop.

The X3 also has the ability to swivel the head up to 90 deg and has an R8 taper tool holder.

Complete complete with machine stand and ideal for a hobby engineer.

Due to size its better to pick up and can be seen working, but we can deliver on a pallet for £100.00 plus VAT. (UK mainland)

Please note the small DRO does not work, but apart from that the machine works fine.

We have mainly been using the machine for drilling and tapping, and it has only had about 100 hours of use.
Can be ordered online here
https://www.zappautomation.co.uk/x3-super-cnc-conversion.html

26833268342683526836

[Gary]

I also have a bit of tooling as well, that will be thrown in, like an ER collet holder and collets and a boring tool.

[Gary]

26842
This is the tooling that comes with it.
boring attachment, collet set, saw, fly cutter and multi point milling cutter.
And coolant pump26843

[Neale]

Gary - your first post said that it had an MT3 taper but that looks like R8 tooling - could you confirm?

[Gary]

Gary - your first post said that it had an MT3 taper but that looks like R8 tooling - could you confirm?
Actually you are right its R8, i just read what was on the side of the machine.
I remember now when i ordered it and requested R8

[Gary]

Also Note that you can pay with card or on paypal credit if christmas was more expensive for your than you thought it would be.

[Gary]

sold