Gary
04-12-2019, 04:00 PM
X3 Super that has been converted to CNC with the Ending CNC ethernet controller, AM882 drivers, 68V power supply and coolant kit.
Working and just needs a PC or Laptop.
The X3 also has the ability to swivel the head up to 90 deg and has an R8 taper tool holder.
Complete complete with machine stand and ideal for a hobby engineer.
Due to size its better to pick up and can be seen working, but we can deliver on a pallet for £100.00 plus VAT. (UK mainland)
Please note the small DRO does not work, but apart from that the machine works fine.
We have mainly been using the machine for drilling and tapping, and it has only had about 100 hours of use.
Can be ordered online here
https://www.zappautomation.co.uk/x3-super-cnc-conversion.html
26833268342683526836
Working and just needs a PC or Laptop.
The X3 also has the ability to swivel the head up to 90 deg and has an R8 taper tool holder.
Complete complete with machine stand and ideal for a hobby engineer.
Due to size its better to pick up and can be seen working, but we can deliver on a pallet for £100.00 plus VAT. (UK mainland)
Please note the small DRO does not work, but apart from that the machine works fine.
We have mainly been using the machine for drilling and tapping, and it has only had about 100 hours of use.
Can be ordered online here
https://www.zappautomation.co.uk/x3-super-cnc-conversion.html
26833268342683526836