JOGARA
28-05-2020, 07:33 PM
Might be a long shot on here, but I am looking for a UK or European manufacturer of carbon fiber tubes.
I require a small quantity of 22mm tubes with a slight S bend in them.
I need a threaded insert in one end. Size does not matter at this point, whatever is on had. Idealy M6-M10.
You can view the part here https://a360.co/2zEu6Fc
I have attached a .STEP and drawing in the attachments below.
Ill need 2 for sample then would be looking to order 20-60 of them.
Thanks
Jack
I require a small quantity of 22mm tubes with a slight S bend in them.
I need a threaded insert in one end. Size does not matter at this point, whatever is on had. Idealy M6-M10.
You can view the part here https://a360.co/2zEu6Fc
I have attached a .STEP and drawing in the attachments below.
Ill need 2 for sample then would be looking to order 20-60 of them.
Thanks
Jack