Kuyguk
13-08-2020, 07:18 PM
Hi,
I just purchased a huanyang 2.2KW water cooled spindle. I already had a Delta M series 2.2KW VFD. The Delta VFD used to be used with a 2.2kw Ugra Spindle.
1. Can I just swap the new huanyang spindle into my system with no rewriting or reprogramming?
2. Huanyang provides very very basic instructions and says that parameters PD005, PD004, PD002, PD070, PD072 and PD144. It’s says that they must be changed to 400hz in order. The. It lists values for each PD. Anyone know how to do this on a Delta VFD? See the attached for the specific instructions from Huanyang
Any help with this would be GREATLY appreciated!
I just purchased a huanyang 2.2KW water cooled spindle. I already had a Delta M series 2.2KW VFD. The Delta VFD used to be used with a 2.2kw Ugra Spindle.
1. Can I just swap the new huanyang spindle into my system with no rewriting or reprogramming?
2. Huanyang provides very very basic instructions and says that parameters PD005, PD004, PD002, PD070, PD072 and PD144. It’s says that they must be changed to 400hz in order. The. It lists values for each PD. Anyone know how to do this on a Delta VFD? See the attached for the specific instructions from Huanyang
Any help with this would be GREATLY appreciated!