Sanyo Denki 103H7124-0440 source or replacement

[ngwagwa]

I am looking for a UK stockist of a Sanyo Denki 103H7124-0440 UK and am not having much luck.
Can anyone point me to a supplier or suggest a suitable replacement available in the UK?
Full specs for the stepper are available here
https://search.sanyodenki.comhttps://www.sanyodenki.com/archive/document/product/servo/catalog_E_pdf/SANMOTION_F2_E.pdf

[Muzzer]

That link is scrambled. Try this https://www.sanyodenki.com/archive/document/product/servo/catalog_E_pdf/SANMOTION_F2_E.pdf

Page 52. 56 mm sq. 1.8°/step Unipolar winding, Lead wire type, ~1Nm, 2A, 3.1mH

[Muzzer]

There's a slightly lower torque version of it on Irish ebay ATM - 0.83Nm instead of 0.98Nm. https://www.ebay.co.uk/itm/SANYO-DENKI-103H7123-0440-STEPPER-MOTOR-R4S1-7B1/292219265776?hash=item4409a022f0:g:qoAAAOSwYgRZlwF 2

Can't you find an equivalent motor from an alternative supplier? These come in reasonably std frame sizes.

[ngwagwa]

There's a slightly lower torque version of it on Irish ebay ATM - 0.83Nm instead of 0.98Nm. https://www.ebay.co.uk/itm/SANYO-DENKI-103H7123-0440-STEPPER-MOTOR-R4S1-7B1/292219265776?hash=item4409a022f0:g:qoAAAOSwYgRZlwF 2

Can't you find an equivalent motor from an alternative supplier? These come in reasonably std frame sizes.

Thanks. I would rather go up in torque an new to all this hence making sure I get it right.

My drivers are Stepper Motor Driver 6.0A, 80V CNC Microstepping CW8060 from cnc4you. I have enough space so am I correct that this unit will do? M57STH76-2808S as listed on https://www.motioncontrolproducts.co.uk/products/2/5/nema-23-57mm-high-torque-stepper-motors/

Thanks

[Muzzer]

It looks about right to me but I'm not the expert on steppers. Certainly, the inductance and dimensions look compatible from what I can make out.

Perhaps somebody else could give an opinion?