Matabele
13-09-2020, 12:39 PM
For sale is this mid 70's era Denford TRIAC . The machine itself is in very good condition . It was given to me by a former employer who used it to prototype parts in tool steel . He used a laptop running the Denford software to control the mill , unfortunately that laptop died . My intention was to upgrade the mill using a Centroid Acorn board .
The listed price includes the milling machine :
R8 Taper
Integral Spraymist coolant system
The mill is powered from a standard 240V mains supply
Also included is a brand new Centroid Acorn control board which includes
everything needed to get the board operational . This should make for a very nice upgrade to this sturdy little mill . I have a refurbished pc that I was going to use for this conversion which I will sell for £50 if needed .
There is a supply of very nice tooling I'll include as well including :
Coventry easy change R8 tool holder
A selection of ER easy change collet chucks
There's an easy change arbor for a face mill or slitting saw etc
A easy change adapter for a drill chuck or similar (not sure what the taper is)
There is also a clarkson autolock chuck on the easy change system
I'm selling this as I simply don't have the time available to complete the conversion , and I have access to CNC machines at my work . I would consider a trade for a manual turret style mill, such as a Chester 836 , Myford vmf (not vmc) , Warco WM20 or 2AF style etc
Thanks for looking please email with any queries, and for some pictures (I couldn't attach them here for some reason).
The listed price includes the milling machine :
R8 Taper
Integral Spraymist coolant system
The mill is powered from a standard 240V mains supply
Also included is a brand new Centroid Acorn control board which includes
everything needed to get the board operational . This should make for a very nice upgrade to this sturdy little mill . I have a refurbished pc that I was going to use for this conversion which I will sell for £50 if needed .
There is a supply of very nice tooling I'll include as well including :
Coventry easy change R8 tool holder
A selection of ER easy change collet chucks
There's an easy change arbor for a face mill or slitting saw etc
A easy change adapter for a drill chuck or similar (not sure what the taper is)
There is also a clarkson autolock chuck on the easy change system
I'm selling this as I simply don't have the time available to complete the conversion , and I have access to CNC machines at my work . I would consider a trade for a manual turret style mill, such as a Chester 836 , Myford vmf (not vmc) , Warco WM20 or 2AF style etc
Thanks for looking please email with any queries, and for some pictures (I couldn't attach them here for some reason).