PeersC
19-09-2020, 06:08 PM
My first computer was a sinclair ZX80 so I am getting on a bit.
Now proud owner of a plethora of raspberry pi's or should it be a bushel.
Been into 3d printing for about three years - I build and make r/c models helicopters / planes and boats so just looking to expand my knowledge and
building a 3018 arduino cnc / laser. going to go in my workshop. got it working fine on the laptop with windows 10 but the pi setup seems to be a problem.
I would like to have a pi setup in the workshop that I can access remote with camera and send gcode to cut / engrave
Anyone got any good ideas.
Cheers from Peers
Now proud owner of a plethora of raspberry pi's or should it be a bushel.
Been into 3d printing for about three years - I build and make r/c models helicopters / planes and boats so just looking to expand my knowledge and
building a 3018 arduino cnc / laser. going to go in my workshop. got it working fine on the laptop with windows 10 but the pi setup seems to be a problem.
I would like to have a pi setup in the workshop that I can access remote with camera and send gcode to cut / engrave
Anyone got any good ideas.
Cheers from Peers