View Full Version : Space Saving Under-Bench Storage
Hello all,
Had a load of long-lozenge shaped construction ply off-cuts left over from a recent job and thought it a shame to bin 'em. Picked up some 14mm (10mm ID) tube for the bushings from a scrap bin and had a bit of threaded rod lying about. The two L brackets were an old (sawn in half) motor mount I'd made myself for a bit of a project that never worked as expected and has since been disassembled. Only thing I need more of are the empty dessert jars... Shouldn't be a problem.
Anyway, here it is:
28988 28990 28989 28991
Wal.
EDIT: Nuts are torqued up to give a bit of resistance and stud-locked into position, each level moves independently.
Muzzer
16-10-2020, 05:15 PM
Creme brulee?
Indeed. And not only... Salted Caramel Cheesecake too...
Muzzer
16-10-2020, 05:19 PM
Aha I'll have to look out for those!
Hurry, limited edition...28992
Neale
16-10-2020, 09:29 PM
With a bladder like mine, you'll need bigger pots...
With a bladder like mine, you'll need bigger pots...
They're ramekins, you animal...
JAZZCNC
17-10-2020, 07:10 PM
They're ramekins, you animal...
No way would I ramekins mine in that tiny pot...:whistle:
Kitwn
18-10-2020, 11:27 AM
Minor mods needed to cope with the shiraz as well as the salmon pinwheels but I like the concept of being able to tuck it under the bench and keep the swarf out of your hors d'oeuvres.
cropwell
20-10-2020, 06:05 AM
Well Wal,
You have inspired me to organise my small parts storage (Drawer 1 of 3).
29018
Rest of the bench is still a shitheap though...
29019
This is part of an ongoing project which started in March...
Note the use of the soft-focus filter to give an extra dimension of dreaminess (I must clean the lens on my phone:witless:)
Rob
Neale
20-10-2020, 07:50 AM
That counts as organised for me, Rob - some of the boxes have labels on!
I made a little cabinet with slide-out drawers recently, using offcuts of ply I had knocking around. Fitted nicely under the router frame, all designed to hold collets, cutters, etc. Pity the drawers are about 1/2" too long for the space in front of the cabinet so I can't quite get them in or out...
cropwell
20-10-2020, 09:13 AM
That counts as organised for me, Rob - some of the boxes have labels on!
WIP Sir ! WIP. I have 48M of labelling tape and the label printer on standby. All part of the office rebuild Lockdown project.
29020
Rob
Neale
20-10-2020, 02:37 PM
You're doing a grand job, Rob - wish I had that much spare floor space in my workshop!
cropwell
20-10-2020, 04:48 PM
It is not so tidy now. I blame Boltzmann. I knew where everything was until him and his mate Heisenberg junked the place!
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.