Space Saving Under-Bench Storage

[Wal]

Hello all,

Had a load of long-lozenge shaped construction ply off-cuts left over from a recent job and thought it a shame to bin 'em. Picked up some 14mm (10mm ID) tube for the bushings from a scrap bin and had a bit of threaded rod lying about. The two L brackets were an old (sawn in half) motor mount I'd made myself for a bit of a project that never worked as expected and has since been disassembled. Only thing I need more of are the empty dessert jars... Shouldn't be a problem.

Anyway, here it is:

28988 28990 28989 28991

Wal.

EDIT: Nuts are torqued up to give a bit of resistance and stud-locked into position, each level moves independently.

[Muzzer]

Creme brulee?

[Wal]

Indeed. And not only... Salted Caramel Cheesecake too...

[Muzzer]

Aha I'll have to look out for those!

[Wal]

Hurry, limited edition...28992

[Neale]

With a bladder like mine, you'll need bigger pots...

[Wal]

With a bladder like mine, you'll need bigger pots...

They're ramekins, you animal...

[JAZZCNC]

They're ramekins, you animal...

No way would I ramekins mine in that tiny pot...:whistle:

[Kitwn]

Minor mods needed to cope with the shiraz as well as the salmon pinwheels but I like the concept of being able to tuck it under the bench and keep the swarf out of your hors d'oeuvres.

[cropwell]

Well Wal,


You have inspired me to organise my small parts storage (Drawer 1 of 3).
29018

Rest of the bench is still a shitheap though...
29019

This is part of an ongoing project which started in March...

Note the use of the soft-focus filter to give an extra dimension of dreaminess (I must clean the lens on my phone:witless:)

Rob

[Neale]

That counts as organised for me, Rob - some of the boxes have labels on!

I made a little cabinet with slide-out drawers recently, using offcuts of ply I had knocking around. Fitted nicely under the router frame, all designed to hold collets, cutters, etc. Pity the drawers are about 1/2" too long for the space in front of the cabinet so I can't quite get them in or out...

[cropwell]

That counts as organised for me, Rob - some of the boxes have labels on!

WIP Sir ! WIP. I have 48M of labelling tape and the label printer on standby. All part of the office rebuild Lockdown project.

29020

Rob

[Neale]

You're doing a grand job, Rob - wish I had that much spare floor space in my workshop!

[cropwell]

It is not so tidy now. I blame Boltzmann. I knew where everything was until him and his mate Heisenberg junked the place!