Need some 4x8 sheets of plywood cut. Ideally in Derby or within 30-40 miles.

[JOGARA]

Hi all

Got a new product in the works and I am looking for someone to cut 2 sheets of 12mm plywood.
YES, I CAN GET IT MOSTLY DONE AT A WOODYARD BUT I WANT TO SEE HOW MUCH I CAN GET IT DONE FOR ON CNC.
Especially as I want a few handle holes cutout. Around 96 in total. Of which I can do here on my 6040 but if I am going to pay for cutting service, might as well get it all done at once...

Note I have not included the holes in the drawings below.

Sheet 1
29036

Sheet 2
29037

Yea ill giggle these around so you can cut with at least a 5mm endmill. Sheet 1 only has as 5mm left after 3 cuts but they are just to give you an idea of what I am after.
Or water jet cutting service?

I can supply material, or you can source locally.
Will be 12mm Birch Plywood BB/BB or better.

Panels I need are:
500x300*16
250x300*4
500x176*8
276x176*12
500x76*8
276x76*12
500x26*8
276x26*12
250x176*4
250x76*4
250x26*4

Ones in Italics are sort of optional. Just trying to make use of the sheet.

Ballpark quotes in the DMs, please!

Thanks
Jack