cncwoodprojects
13-12-2020, 12:06 AM
Hi, searching in google i found this forum and i see it's a great community :)
I have a CNC i make and i improve it time to time, you can see some videos of my cnc in youtube here https://www.youtube.com/channel/UCencrm5YnM-frz5gfJTYzNg
In my first setup i used a kress fme router, nema 23 steppers, arduino with GRBL...
Now i started to upgrade the machine with VFD Spindle (1,1kw teknomotor) and chinese VFD (1,5kW), csmio ip-m ethernet controller for start to use mach3/4 (for the moment mach3) and hybrid closed loop nema 24 motors.
I need some time for prepare the controller box in a metallic case (big IP65 case) and undestand all new things in mach3.
Thanks for your help and maybe i can help someone too.
I have a CNC i make and i improve it time to time, you can see some videos of my cnc in youtube here https://www.youtube.com/channel/UCencrm5YnM-frz5gfJTYzNg
In my first setup i used a kress fme router, nema 23 steppers, arduino with GRBL...
Now i started to upgrade the machine with VFD Spindle (1,1kw teknomotor) and chinese VFD (1,5kW), csmio ip-m ethernet controller for start to use mach3/4 (for the moment mach3) and hybrid closed loop nema 24 motors.
I need some time for prepare the controller box in a metallic case (big IP65 case) and undestand all new things in mach3.
Thanks for your help and maybe i can help someone too.