New member introduction

[chessfoss]

Hi,

I am a new member from Bedale North Yorkshire. I don't have much experience and would welcome and advice on recommendations to buy a CNC machine for more than just hobby use.

Thanks

[Dodgy Geezer]

Probably the first thing to do is specify the type of material you want to cut, and the size of the item you want to produce. These are going to be very important in determining what machine you need...

[Andrew C]

Hi Dodgy Geezer I am looking to cut and engrave mdf and plywood at a maximum of 400mm what sort of machine should I look for.